Dostępność: Na zamówienie
Koszt wysyłki: od 0,00 zł
Stan magazynowy:
CEA-2006 Compliant: |
Number of Channels: | 4 |
Rated Power (RMS Continuous Power): |
100 Watts x 4 @ 4-Ohm 150 Watts x 4 @ 2-Ohm 300 Watts x 2 @ 4-Ohm Bridged 2-Ohm x 2 Bridged Stable |
Total Power (Sum of Rated Power): |
600 Watts RMS |
|
Dynamic Power (PVC/PowerCube® Measurement): |
Front Channels 139 Watts x 2 @ 4-Ohms 0° Res 236 Watts x 2 @ 2-Ohms 0° Res Rear Channels 140 Watts x 2 @ 4-Ohms 0° Res 236 Watts x 2 @ 2-Ohms 0° Res |
Bridgeable: | Yes |
Frequency Response: | 20Hz to 20kHz +/- 1dB |
Efficiency (average): | 70% @ 4-Ohm 64% @ 2-Ohm |
Total Harmonic Distortion(THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
Crossover Controls: | Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth |
Tone Controls: | Front Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Rear Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz |
Input Sensitivity: | 150 mV to 4 V |
Signal Input: | Front Low level: 1 RCA pair Rear Low level: 1 RCA pair |
Signal Output: | Low Level: 1 RCA pair |
Power Input Connector: | Block |
Power Wire Gauge: | 4 AWG |
Speaker Output Connector: | Screw terminal barrier strip |
Speaker Wire Gauge: | 8 AWG to 18 AWG |
Heat Sink Type: | Cast aluminum |
Cooling: | Convection |
Remote Controls: | Optional Remote Punch EQ (overrides rear channel built-in Punch EQ) |
Visual Indicators: | Power Thermal Protect |
Circuit Topology Class: | Class-A/B |
Operating Voltage: | 9 - 16 VDC |
Recommended Fuse (not included): |
80 A |
Max. Current Draw (13.8V Sinewave): | 80 A |
Average Current Draw (13.8V Music): | 40 A |
Suggested Alternator: | 75 A |
Shipping Weight: | 12.00 Lbs. (5.44 Kg.) |
Dimensions (HxWxL): | 2.14 x 8.14 x 14.91 (in) 5.42 x 20.68 x 37.86 (cm) |
Dimensional Diagram: |
Wzmacniacz czterokanałowy z serii Power.
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers
The Power T600-4 is a 4-channel amplifier capable of producing 150 Watts into each of its four channels at 2-Ohms. The T600-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.