Dostępność: Na zamówienie
Czas wysyłki: 10 dni
Koszt wysyłki: od 0,00 zł
Stan magazynowy:
Stan produktu: Nowy
CEA-2006 Compliant: |
Number of Channels: | 4 |
Rated Power (RMS Continuous Power): |
60 Watts x 4 @ 4-Ohm 100 Watts x 4 @ 2-Ohm 200 Watts x 2 @ 4-Ohm Bridged 2-Ohm x 2 Bridged Stable |
Total Power (Sum of Rated Power): |
400 Watts RMS |
|
Dynamic Power (PVC/PowerCube® Measurement): |
Front Channels 90 Watts x 2 @ 4-Ohms 0° Res 154 Watts x 2 @ 2-Ohms 0° Res Rear Channels 90 Watts x 2 @ 4-Ohms 0° Res 154 Watts x 2 @ 2-Ohms 0° Res |
Bridgeable: | Yes |
Frequency Response: | 20Hz to 20kHz +/- 1dB |
Efficiency (average): | 69% @ 4-Ohm 68% @ 2-Ohm |
Total Harmonic Distortion(THD+Noise): | 4-Ohm: <1.0% 2-Ohm: <1.0% |
Crossover Controls: | Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth |
Tone Controls: | Front Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz Rear Channels - Punch EQ Treble: 0dB to +12dB @ 12kHz Bass: 0dB to +18dB @ 45Hz |
Input Sensitivity: | 150 mV to 4 V |
Signal Input: | Front Low level: 1 RCA pair Rear Low level: 1 RCA pair |
Signal Output: | n/a |
Power Input Connector: | Block |
Power Wire Gauge: | 8 AWG to 4 AWG |
Speaker Output Connector: | Screw terminal barrier strip |
Speaker Wire Gauge: | 8 AWG to 18 AWG |
Heat Sink Type: | Cast aluminum |
Cooling: | Convection |
Remote Controls: | Optional Remote Punch EQ (overrides rear channel built-in Punch EQ) |
Visual Indicators: | Power Thermal Protect |
Circuit Topology Class: | Class-A/B |
Operating Voltage: | 9 - 16 VDC |
Recommended Fuse (not included): |
60 A |
Max. Current Draw (13.8V Sinewave): | 60 A |
Average Current Draw (13.8V Music): | 30 A |
Suggested Alternator: | 75 A |
Shipping Weight: | 11.90 Lbs. (5.39 Kg.) |
Dimensions (HxWxL): | 2.14 x 8.14 x 13.66 (in) 5.42 x 20.68 x 34.69 (cm) |
Dimensional Diagram: |
Wzmacniacz czterokanałowy z serii Power.
The T400-4 amplifier is perfect for front/rear fading stereo systems or when dedicated amplification is required between front stage speakers and rear subwoofer(s). Thanks to the Dynamic Thermal Management, the small chassis design insures it can be installed in any location – like under front seats.
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.